WEED EATER DIES WHEN THROTTLED HOW TO
WEED EATER DIES WHEN THROTTLED INSTALL
WEED EATER DIES WHEN THROTTLED FULL

4 The Final Touches On An Echo Trimmer Bogging Down… Why Does My Echo Trimmer Bog Down?Īll power tools eventually experience a dip in performance at some point.

WEED EATER DIES WHEN THROTTLED HOW TO

3 How to prevent an Echo trimmer from bogging down?.2 How To Fix A Bogged-Down Echo Trimmer Engine?.Alternatively, you might use a carburetor rebuild kit which you can pick up at almost any garden or DIY store and will contain any replacement parts that you may need. This part can be totally removed for maintenance but if it is damaged beyond repair, then it can also be easily replaced. In addition to this, you may need to check that the seals on the carburetor are not damaged or clogged with debris. In the case of the carburetor, a special cleaning solution is required to do the job correctly. As we have already mentioned, good weed eater maintenance is essential and regular cleaning of all parts will help your equipment to function properly. In the best cases, it is a simple matter of cleaning the carburetor.

WEED EATER DIES WHEN THROTTLED INSTALL

When you have successfully removed the old parts, you can install the new ones ensuring that the fuel filter is put into place before using the weed eater.Īt this point it is always worth checking the carburetor as there is a very good chance that this could be the culprit. You will also need to detach the fuel lines from the carburetor end which will entail removing the cover plate. Once you have done this, using long, thin pliers will aid you in removing the filter and the fuel lines. If you are going to replace the fuel lines, it is vital that you first drain the tank of all fuel.

In the worst cases, the fuel lines and filter may need to be replaced. In this instance, you will once again need to clean these components. Furthermore, there could be an issue with the fuel filter becoming blocked, which could have a similar effect. It could be that the fuel lines are damaged or, similarly to the gas cap, could become clogged. These lines are connected to the carburetor which is the part of the system that delivers fuel and air to the engine.

WEED EATER DIES WHEN THROTTLED FULL

If the fuel lines of your weed eater are not in full working order then this can affect the level of fuel that the engine is receiving.

However, sometimes, the gas cap can be extremely blocked and in this instance, you will be left with no other option but to replace it.

You can do this with warm, soapy water making sure that you give it a good rinse and allow it to dry fully before putting it back. This is a pretty simple fix and involves nothing more than simply removing the gas cap and giving it a good clean. However, if the weed eater doesn’t pack up then it is likely that the gas cap is clogged or dirty. If the problem persists, then it is likely that the issue is not with the gas cap. Once you’ve got it open halfway, turn the choke off and see where you end up. You don’t need to remove it entirely as the point of this is to see if the greater airflow improves things and removing halfway is more than enough. To investigate whether this is the issue, you will need to start your weed eater before half removing the gas cap. As the trimmer starts up and only runs on choke, this could be related to the valve in the gas cap.

One of the first issues that you will need to check when trying to solve this problem is to look at the gas cap. Conversely, when the choke lever is off, normal air flow can take place. The weed eater choke lever can either be on or off, when it is in the on position this means that the valve is closed and air cannot get into the engine. After getting the engine started, you are then able to reopen the choke valve and return to the normal amount of airflow. This is because this fuel-heavy mixture much more easily combusts when it reaches the combustion chamber. When the choke valve is shut off, this creates a much richer fuel and air mixture which is imperative when the engine is turned on for a cold start. It is used to reduce the amount of air that gets into the engine, particularly on a cold start. The weed eater choke is a valve which is located on the air intake of the engine in a gas weed eater. The power system of a weed wacker is incredibly delicate and intricate, there are several components that make up the fuel and engine system and if one of them is out of whack, this can mess up the entire thing. Before we get into the nitty gritty of what might be causing your problems, it is important that we understand the role of the weed eater choke.

Weed eater dies when throttled